Products Center
Products

Products Center

Sync-Box - NG-CTL200H

Brief

NG-CTL200H  is  a  centralized  management  and  signal  synchronization  controller  for  structured  agent  system  products.
It  provides  agent  management,  banner  subtitles,  Video  wall,  single-screen  windowing,  image  overlay,  multi-screen  roaming,  OSD  pre-monitoring,  local  switching,  local  push  and  permissions  centralized  management  for  structured  agent  system,  and  supports  POE  remote  power  supply.

Features

1,  support  dual  host  physical  hot  backup,  seamless  conversion;
2,  can  access  the  optical  fiber  switching  network  and  RJ  electrical  switching  network  at  the  same  time,  photoelectric  dual  network  redundant  thermal  backup.
3,  using  the  international  general  SFP  optical  module  slot,  can  use  any  standard  SFP  optical  module,  support  single-mode,  multi-mode  lamp  different  specifications  of  fiber  optic  cable,  the  transmission  distance  of  the  longest  support  160KM.
4,  PoE+  local  dual  power  supply,  support  PoE  network  power  supply,  but  also  support  the  connection  of  power  adapter  power  supply,  power  supply  can  also  be  a  single  item.
5,  dual  HDMI2.0  interface,  dual  balanced  Analog  audio  interface,  bidirectional  RS232  interface,  dual  USB  interface,  USB  host  interface.
6,  system  reset  button.  Long  press  for  5  seconds,  the  system  restores  the  factory  Settings,  and  the  manual  restart  will  take  effect;  Long  press  for  15S,  the  system  is  restored  to  the  factory  software  version.
7,  provide  an  OLED  display  that  can  display  the  current  device  name,  status  and  device  IP  address
8.  Provide  6  LED  indicators  for  feedback  of  current  device  codec  mode,  network  connection  status,  network  connection  rate,  system  status  (normal,  standby,  fault)  and  power  status  (working,  standby  or  not  powered  on)
9,  provide  a  multi-function  button,  short  press  the  boot  in  standby  state,  short  press  the  boot  state  to  view  the  codec  mode  and  IP  address,  long  press  the  boot  state  to  enter  the  standby  state.  The  device  from  power  on  to  output  image  ≤15  seconds
10,  body  model:  ±8kV  (air  discharge),  ±4kV  (contact  discharge)
11,  with  power  off  memory  function,  when  the  equipment  from  the  abnormal  power  state  to  restore  power  supply,  automatically  restore  to  the  state  before  power  off,  including  standby  state  and  equipment  working  parameter  Settings
12,  support  docking  with  the  monitoring  system,  support  mainstream  IPC  without  codec  directly  pull  stream  access,  the  seat  can  pull  stream  or  push  to  the  large  screen  according  to  the  authority,  support  IPC  pan-head  control
Files not found!