NT-DP0810R  is  a  rail  controllable  power  controller.  Support  8  independent  switch  control,  each  channel  allows  a  maximum  current  of  10A/220V  through,  the  instantaneous  peak  of  16A/220V.  It  can  be  used  to  control  switch  products,  such  as  lights,  curtains,  upgraders  and  other  equipment.  With  manual  switch  button,  you  can  manually  switch  the  channel.  Support  channel  interlock,  independent  switch,  timing  control.  Provide  RS485  control  port

1,  standard  guide  rail  installation,  easy  installation  and  disassembly,  8  DIN  bit  width  (1  modulus  bit  width  =18mm)
2.  The  shell  adopts  high  strength  elastic  thermoplastic  polycarbonate  (PC)  engineering  plastic,  strong  impact  resistance,  oxidation  resistance  and  strong  flame  retardant
3,  provide  8  channel  16A  relay  switch,  each  loop  can  independently  control  2200W  resistive  load  or  1100W  inductive  load
4,  equipped  with  emergency  manual  switch  button,  convenient  for  debugging  and  testing,  equipped  with  switch  status  indicator  light
5,  provide  a  set  of  cascaded  input  and  output  ports,  can  set  the  device  ID  multiple  cascaded,  provide  1  emergency  forced  switch  port
6,  provide  RS-485  bus  communication,  support  DMX,  MODBUS  RTU,  MODBUS  ASCII  and  other  control  protocols,  support  all  third  party  central  control  system  integrated  control
7,  support  8  channels  independent  open,  close,  take  off  control  and  sequential  open,  close  control  operation
8,  support  8  channels  independent  delay  opening  and  closing  operation,  the  longest  delay  time  is  18  hours
9.  Freely  set  the  time  interval  of  1-8  channels  and  change  the  channel  sequence  of  timing  switch
10.  Support  functions  such  as  channel  interlock,  power  down  state  storage  and  recovery,  scene  saving  and  calling